Cabinet Hardware Jig – Drill Every Pull and Knob in the Same Spot
Cabinet Hardware Jig – Drill Every Pull and Knob in the Same Spot
Cabinet Hardware Jig – Drill Every Pull and Knob in the Same Spot
BUY 2 & GET 20% OFF
TheraPro™ Neck Massager - At-Home Relief for Neck Tension
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Drill perfect holes for cabinet pulls in seconds. No more ruined doors.
Set it once, flip it for the opposite door, and drill. Mark knobs and pulls on every door and drawer front, with no tape measure and no pencil marks.
Why you'll love it
- Repeatable accuracy. Adjustable guides and a measuring scale put every hole in the same spot, door after door. Stainless steel guide bushings.
- Works on doors and drawers. A center notch aligns the jig to drawer fronts, and spacing goes up to about 12 in (300 mm), from small knobs to long bar pulls.
- Fast setup. Set the spacing, drill. Flip it over for the other door, no re-measuring.
How it works
- Set the spacing. Slide the guide blocks to match your pull's hole spacing.
- Position. Rest the T-plate on the door or drawer edge and set the distance.
- Drill. Drill straight through the guide holes.
- Flip for the next door. Same settings, mirror-image result.
Jig vs. tape measure and pencil
| Tape measure & pencil | HiC Toolsmith Jig | |
|---|---|---|
| Same spot on 20 doors | Re-measure every time | Set once |
| Risk of an off-center hole | High | Low |
| Drawer fronts | Find the center by hand | Center notch |
| Left and right doors | Measure each | Flip it |
Specs
- Body: aluminum alloy T-plate and scaled bar
- Guide bushings: stainless steel
- Scales: millimeters and inches
- Main bar scale: ±150 mm (±6 in) from the center
- Hole spacing: up to about 12 in (300 mm), center to center
- Drill bit: 5 mm, with a stop collar to set drilling depth
What's in the box
Standard Kit: jig, 5 mm drill bit, stop collar, hex key.
Pro Kit: everything in the Standard Kit plus a 400 mm extension bar.
Drill, screws, pulls and knobs are not included.
FAQ
What pulls does it fit? Knobs and pulls with hole spacing up to about 12 in (300 mm), center to center.
Does it work on drawers? Yes. The center notch aligns it to the drawer front.
Do I need my own drill bit? No. A 5 mm bit with a stop collar is included in both kits.
How long is delivery? Orders are processed in 1-3 business days, then take about 7-12 business days to arrive.
What if I'm not happy? 30-day money-back guarantee. Contact hictoolsmith@gmail.com within 30 days of delivery.
What people who have used it say
-
At first, EMS feels strange, I won't lie, but after a couple of uses you get used to it. Now I use it almost every night.
-
I honestly thought it was going to be just another TikTok gadget, but it surprised me. I use it after work and it really does help reduce neck tension
-
I bought it because my neck hurt terribly after the gym, and it's helped a lot with the tension. Especially the 4-point model.
Results
What people have noticed in their first month of using it
Results heading
90%
They say their neck feels much more relaxed after using it for a few minutes.
90%
They say it helps them disconnect from stress at the end of the day
90%
They noticed less neck tension and a greater feeling of relief and rest.
Your Daily Wellness Ritual
Whether you're working at your desk, relaxing on the couch, or traveling, TheraPro™ fits seamlessly into your routine. Just 10 to 15 minutes a day is all it takes to relieve persistent tension, improve mobility, and reclaim your comfort. It’s like having a personal masseuse on standby 24/7.
Frequently Asked Questions
What is it and how does it work?
What is it and how does it work?
It is an EMS cervical massager with heat that uses low-frequency pulses to relax neck muscles and reduce accumulated tension.
You just have to place it on your neck, turn it on, and adjust the intensity.
Can you feel it? Is it painful?
Can you feel it? Is it painful?
Yes, you can feel it, especially the EMS pulses. The sensation might be strange at first if you've never used one, but it shouldn't hurt.
We recommend starting at low intensity and gradually increasing it.
Does it really help with stress and tension?
Does it really help with stress and tension?
Many customers use it after work, before going to sleep, or after spending many hours in front of the computer.
Heat and massage help to relax the cervical area and relieve the feeling of accumulated tension.
How long should I use it?
How long should I use it?
It is recommended to use it for 10 to 15 minutes per session. You can use it once or twice a day, depending on your comfort level.
Advanced 4-Node Deep Therapy
Why settle for basic massagers? TheraPro™ features four scientifically positioned, heated massage heads designed to mimic real human hands. By targeting multiple pressure points simultaneously, it delivers a more precise, comprehensive massage that penetrates deeper into the muscle layers to dissolve stubborn knots instantly.